توضیحات محصول
INTERRA SMARTHOME
موارد استفاده از منبع تغذیه INTERRA
تامین انرژی و انتقال سیگنال در یک لاین KNX با حداکثر 16 و 32 و 64 دستگاه
قابل استفاده به عنوان یک منبع تغذیه مجزا با خروجی 30 VDC و حداکثر جریان 160 و 320 و 640 mA
محافظت دربرابر اتصال کوتاه، افزایش بار مصرفی و افزایش دما
دارای Led های نشان دهنده شرایط عادی یا اضطراری (اتصال کوتاه یا افزایش بار)
این دستگاه در تابلوبرق نصب می شود و رعایت اصول فنی و حفاظتی در نصب و سربندی آن الزامیست.
Devices
ITR900-164 ITR900-132 ITR900-116
Power Supply
230 VAC(+/- %10)
Power Consumption(Max)
55 W (ITR900-164) 30 W (ITR900-132) 21 W (ITR900-116)
Power Consumption (Typical)
24 W (ITR900-164) 12.5 W (ITR900-132) 6.6 W (ITR900-116)
Rated Current (Total)
640 mA (ITR900-164) 320 mA (ITR900-132) 160 mA (ITR900-116)
Rated Voltage
30 VDC
Type of Protection
IP 20
Temperature Range
Operation(-5°C…45°C) Storage (-25°C…55°C)
Maximum Air Humidity
< 90 RH
Color
White Dimensions 70x90x66 (WxLxH)
MOUNTING, COMMISSIONING AND SAFETY NOTES
• The device may only be installed and put into operation by a qualified electrician or authorized personnel. • Mounting Location: Installation only on a 35 mm DIN rail of a distribution board. • Device needs at least 4 standard modules width at installation. • Screw down strength is less than 0.4Nm. • Avoid contact with rain, liquids and corrosive gases. • Check Connections: Re-tighten all connections after installation. • Cable Connections: Do not get wrong connection for KNX Black and Red wires, device input AC wires and external supply output wires. • Power supply has an additional 30 VDC short circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). • The voltage output is overload, short circuit and over temperature protected. • Output without choke can be used as a constant 30 VDC supply and output with choke can be used as a KNX Bus supply.
- جهت دریافت DOCUMENT منبع تغذیه INTERRA اینجا کلیک کنید
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.